Are you looking for:
- Easy no drill installation
- Bolts to factory mounting points
- 500 lb. weight rating
- 4 inch wide step area
- Seamless welded end caps
- 30 degree OE style bends on each end
- 10 Year Warranty
Raptor Series offers its curved 4 inch OE Style Black E-Coated Oval Step Bars! This step features seamless welded end caps and 30 degree OE styled bends on each end. This product is backed by a 10 Year Warranty.
- Vehicle specific fitment to ensure that the part is right for your vehicle with variable length design adapt to your lift
- Accurately set your sway bar operating angle correcting geometry on lifted vehicles while improving performance on and offroad
- Tension-free rod ends reduce wear and strain, Special zinc plating applied for corrosion resistance and long lasting protection
- Maintain sway bar balance for predictable handling while factory style bushings eliminate loss of motion
- Limited lifetime manufacturer warranty on the workmanship/structure, 5 years on the components, and 1 year on the finish/coating
Upgrade your suspensions geometry with the Raptor Series Sway Bar End Links. These links will prevent unwanted axle housing contact. Eliminate loss of motion with high quality factory style bushings and maintain sway bar balance for increased handling performance and comfort. The Raptor Series sway bar end links are constructed using tension free rod ends and zinc plating that offer the best in corrosion resistance and smooth operation on or off road. Backed by a limited lifetime manufacturer warranty on the workmanship/structure, 5 years on the components, and 1 year on the finish/coating.
- Heavy duty alloy steel body 2.0 bump stop with 2.5 inch stroke to absorb heavy impacts
- Valved perfectly to increase suspension performance. Fully adjustable for different lift heights and tire sizes
- Completely serviceable and rebuildable for extended life
- Large pistons, optimized valving, polished steel plunger and replaceable striking pad offer the highest performance in the most extreme settings
- Sold in pairs, professional installation is recommended
When driving on rocky terrain, the factory-installed bump stops on your vehicle find it hard to withstand the extra amount of force placed on them. However, with the RSO Suspension Hydraulic 2.0 Bump Shocks with 2.5-inch stroke were designed to withstand those forces. They allow you to safely use all of your vehicle's effective suspension travel without damage to OEM or aftermarket shocks and preventing damage to your undercarriage. Factory rubber bump stops installed by manufacturers, are not designed for repeated use unlike the RSO Suspension hydraulic bump shocks which are completely rebuildable and serviceable for quality performance throughout your vehicle’s life.
- 6.5 inch wide step area with reverse punched serrated holes along the entire length of the board for maximum grip
- Constructed from strong, lightweight, corrosion resistant aircraft grade aluminum with a black textured finish. Heavy duty brackets provide a 400 pound weight rating per side
- Custom slide track system gives you the flexibility to adjust the position of your boards to your liking while still providing you a no-drill rocker panel install
- Quality guaranteed with a limited lifetime manufacturer warranty on the workmanship/structure and a 10 year limited manufacturer warranty on the black textured finish
- Bolts to factory mounting points. Includes driver and passenger side boards, brackets, and hardware for a complete install
- Ships in 2 boxes. Boards and brackets separately - 1 master tracking # provided that shows both shipments on the carrier website
Raptor Series 6.5in Sawtooth Slide Track Running Boards are your ultimate heavy duty contractor style steps! The Sawtooth Boards include reverse punched serrated holes along the entire length of the board for maximum grip. These boards are constructed of anti-corrosion aircraft grade aluminum with a black textured finish for long lasting durability and lightweight construction. All kits have a recommended weight rating of 400 lbs per side. Backed by a limited lifetime manufacturer warranty on the workmanship/structure along with a 10 year limited manufacturer warranty on the finish.
These running boards are a part of our Slide Track Series product line. Each of our Slide Track Series products are equipped with a track system which will work with any of our vehicle specific brackets, allowing for an easy no-drill installation. The Slide Track system allows you to adjust the positioning of your running boards along your vehicle for a fit that is tailored to your liking. You also have the option to customize your truck with a different style of our slide track steps without having to change the brackets if your preference should change.
All Slide Track Kits are compatible with Raptor Series branded bracket kit covers and 10 inch universal LED light strips (Sold separately). Thermoplastic bracket covers protect your brackets and provide them with a clean factory look. The 3M backed LED Light Strips are available in white and RGB and a great addition to easily add lighting to your steps.
- Forged billet aluminum with black anodized coating and stainless-steel hardware are resistant to corrosion stand up to the most brutal elements for long trouble-free life
- Increases wheel travel, removes deflection and binding allowing more articulation throughout the suspension travel
- Large greaseable polyurethane bushings and steel rod ends with hardened steel high misalignment spacers offer greater angularity and wear resistance while being fully rebuildable
- Direct bolt on application with vehicle specific design includes factory mounting location and all hardware required for quick installation
- Limited Lifetime Manufacturer warranty on structure, 5 years on components and 1 year on finish and coating
RSO Suspension Forged Billet Rear Upper Link Arms are the perfect replacement for the weak factory upper links. Forged Billet aluminum construction, black anodized coating and relief cuts machined into the finish for a stunning look. The arms are lighter and stronger than the original arms while also being fully adjustable to fit any stock height or lifted application. Large 3/4-inch steel rod ends and 2-inch greaseable polyurethane bushings withstand the harshest environments while elimination side to side movement. Fully rebuildable using replaceable steel rod ends and polyurethane bushings for a lifetime of performance. The adjustable rod end allows a custom pinion angle while installed on the vehicle and the large jam nut ensures your settings are locked in. The included high misalignment spacers and rod ends increase suspension articulation while removing any binding. Direct bolt on design and all required hardware included ensures a quick and easy installation. Improve articulation and comfort with RSO’s forged billet rear upper link arms. With a limited lifetime manufacture warranty on the structure, 5-year warranty on components and 1 year warranty on finish and coating the RSO Suspension forged billet rear upper link arms are a great improvement for your offroad vehicle.